Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
pellet in molten Zr claddingIto, Ayumi*; Yamashita, Susumu; Tasaki, Yudai; Kakiuchi, Kazuo; Kobayashi, Yoshinao*
Journal of Nuclear Science and Technology, 60(4), p.450 - 459, 2023/04
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)Liu, J.; Dotsuta, Yuma; Sumita, Takehiro; Kitagaki, Toru; Onuki, Toshihiko; Kozai, Naofumi
Journal of Radioanalytical and Nuclear Chemistry, 331(6), p.2785 - 2794, 2022/06
Times Cited Count：3 Percentile：68.71(Chemistry, Analytical)Remnant nuclear fuel debris in the damaged nuclear reactors at the Fukushima Daiichi Nuclear Power Plant (FDNPP) has contacted the groundwater containing microorganisms for over ten years. Herein, we report the possibility of bacterial alteration of fuel debris. We investigated the physical and chemical changes of fuel debris simulants (FDS) in the powder and pellet forms via exposure to two ubiquitous bacteria, Pseudomonas fluorescens and Bacillus subtilis. In the experiments using FDS composed of the powders of Fe(0), solid solution of CeO and ZrO, and SiO, Ce, Zr, and Si were hardly dissolved, while Fe was dissolved, a fraction of the dissolved Fe was present in the liquid phase as Fe(II) and Fe(III), and the rest was precipitated as the nano-sized particles of iron (hydr)oxides. In the experiment using P. fluorescens and FDS pellet pieces prepared by melting the Fe(0) particles and solid solution of CeO and ZrO, the bacteria selectively gathered on the Fe(0) particle surface and made corrosion pits. These results suggest that bacteria in groundwater corrode the iron in fuel debris at FDNPP, change fuel debris into porous one, releasing the nano-sized iron (hydr)oxide particles into the water.
Kitagaki, Toru; Yoshida, Kenta*; Liu, P.*; Shobu, Takahisa
npj Materials Degradation (Internet), 6(1), p.13_1 - 13_8, 2022/02
Times Cited Count：1 Percentile：14.66(Materials Science, Multidisciplinary)O decomposition at the U
O
surface in bicarbonate solutionMcGrady, J.; Kumagai, Yuta; Watanabe, Masayuki; Kirishima, Akira*; Akiyama, Daisuke*; Kitamura, Akira; Kimuro, Shingo
RSC Advances (Internet), 11(46), p.28940 - 28948, 2021/08
Times Cited Count：5 Percentile：38.19(Chemistry, Multidisciplinary)Igarashi, Hiroshi
JAEA-Review 2020-006, 261 Pages, 2020/09
JAEA-Review-2020-006.pdf:4.42MB
A literature review was conducted on the increase in surface area of vitrified products of HLW due to the fracturing caused by cooling during glass pouring process and by mechanical impact, from the perspective of a parameter of the radionuclide release model in the performance assessment of geological disposal system studied overseas. The review was focused on the value of surface area increase factor set as a parameter in the model, the experimental work to evaluate an increase in surface area, and how the parameters on surface area were determined based on the experimental results. The surface area obtained from the experiments executed in Japan was also discussed in comparison with the overseas studies. On the basis of the investigation, the effects of various conditions on the surface area were studied, such as a diameter of vitrified product, cooling condition during and after the glass pouring, impact on vitrified products during their handling, environment after the closure of disposal facility, and others. The causes of fracturing are associated with the phenomena or events in the waste management process such as production, transport, storage, and disposal. The surface area increase factors set in the nuclide release model of the glass and their bases were reviewed. In addition, the measured values and the experimental methods for surface increase factors published so far were compared. Accordingly, the methods for measuring surface area as the bases were identified for these factors set in the models. The causes of fracturing and features of these factors were studied with respect to the relation with the waste management process. The results from the review and assessment can contribute to the expanding the knowledge for the conservative and realistic application of these factors to performance assessment, and to the developing and upgrading of safety case as a consequence.
-HF mixture; Kinetics and mechanismSimonnet, M.; Barr
, N.*; Drot, R.*; Le Naour, C.*; Sladkov, V.*; Delpech, S.*
Radiochimica Acta, 107(4), p.289 - 297, 2019/04
Times Cited Count：2 Percentile：21.58(Chemistry, Inorganic & Nuclear)Wan, T.; Saito, Shigeru
Metals, 8(8), p.627_1 - 627_22, 2018/08
Times Cited Count：17 Percentile：66.2(Materials Science, Multidisciplinary)
activity and temperature on the dissolution rate of compacted montmorillonite under highly alkaline conditionsSawaguchi, Takuma; Tsukada, Manabu; Yamaguchi, Tetsuji; Mukai, Masayuki
Clay Minerals, 51(2), p.267 - 278, 2016/05
Times Cited Count：7 Percentile：24.47(Chemistry, Physical)The dependences of the dissolution rate of compacted montmorillonite on activity of OH (a
-) and temperature (T) were investigated. The dissolution rate of montmorillonite (
) in compacted pure montmorillonite, which was formulized as = 10
(a-)
e
, was higher than that in the compacted sand-bentonite mixtures: = 3500 (a-)
e
. The difference can be explained by considering the decrease in a- in the mixtures accompanied by dissolution of accessory minerals such as quartz and chalcedony. The dissolution rate model developed for pure montmorillonite is expected to be applied to bentonite mixtures if quantification of the decrease in a- is achieved somehow.
-radiation on a direct disposal system for spent nuclear fuel, 1 Review of research into the effects of -radiation on the spent nuclear fuel, canisters and outside canistersKitamura, Akira; Takase, Hiroyasu*
Journal of Nuclear Science and Technology, 53(1), p.1 - 18, 2016/01
Times Cited Count：3 Percentile：12.5(Nuclear Science & Technology)Not only geological disposal of vitrified waste generated by spent fuel (SF) reprocessing, but also the possibility of disposing of SF itself in deep geological strata (hereinafter "direct disposal of SF") may be considered in the Japanese geological disposal program. In the case of direct disposal of SF, the radioactivity of the waste is higher and the potential effects of the radiation are greater. Specific examples of the possible effects of radiation include: increased amounts of canister corrosion; generation of oxidizing chemical species in conjunction with radiation degradation of groundwater and accompanying oxidation of reducing groundwater; and increase in the dissolution rate and the solubility of SF. Focusing especially on the effects of -radiation in safety assessment, this study has reviewed research into the effects of -radiation on the spent nuclear fuel, canisters and outside canisters.
-radiation on a direct disposal system for spent nuclear fuel, 2; Review of research into safety assessments of direct disposal of spent nuclear fuel in Europe and North AmericaKitamura, Akira; Takase, Hiroyasu*; Metcalfe, R.*; Penfold, J.*
Journal of Nuclear Science and Technology, 53(1), p.19 - 33, 2016/01
Times Cited Count：1 Percentile：6.25(Nuclear Science & Technology)Not only geological disposal of vitrified waste generated by spent fuel (SF) reprocessing, but also the possibility of disposing of SF itself in deep geological strata (hereinafter "direct disposal of SF") may be considered in the Japanese geological disposal program. In the case of direct disposal of SF, the radioactivity of the waste is higher and the potential effects of the radiation are greater. Specific examples of the possible effects of radiation include: increased amounts of canister corrosion; generation of oxidizing chemical species in conjunction with radiation degradation of groundwater and accompanying oxidation of reducing groundwater; and increase in the dissolution rate and the solubility of SF. Therefore, the influences of radiation, which are not expected to be significant in the case of geological disposal of vitrified waste, must be considered in safety assessments for direct disposal of SF. Focusing especially on the effects of -radiation in safety assessment, this study has reviewed safety assessments in countries other than Japan that are planning direct disposal of SF. The review has identified issues relevant to safety assessment for the direct disposal of SF in Japan.
Yamaguchi, Tetsuji; Sakamoto, Yoshifumi; Akai, Masanobu; Takazawa, Mayumi; Iida, Yoshihisa; Tanaka, Tadao; Nakayama, Shinichi
Physics and Chemistry of the Earth, 32(1-7), p.298 - 310, 2007/00
Times Cited Count：43 Percentile：72.99(Geosciences, Multidisciplinary)Dissolution rate of montmorillonite, diffusivity of hydroxide ion and permeability coefficient in compacted sand-bentonite mixtures were experimentally determined and formulated. A coupled mass-transport/chemical-reaction code was developed to predict variation in permeability of engineered bentonite barrier with alkaline fluid by using the formulae.
Haraga, Tomoko; Kameo, Yutaka; Nakashima, Mikio
Bunseki Kagaku, 55(1), p.51 - 54, 2006/01
Times Cited Count：4 Percentile：14.45(Chemistry, Analytical)A relatively large quantity of sample solutions have to be prepared for radiochemical analysis of solidified products yielded by plasma melting treatment of non-metallic radioactive wastes. In order to dissolve the solidified products sample rapidly, dissolution method with microwave heating devices was applied. In a conventional method only by external heating with various mixtures of acids (HNO, HF, HClO
and HSO), a 0.1 g amount of the sample was dissolved with difficulty. However, applying the microwave assisted dissolution method, a 1 g amount of the sample was completely dissolved in a shorter time. Thereby the time for dissolution procedures was shortened less than a one-tenth. The present dissolution method was successfully applied to the blast furnace slag as a reference material to determine main elements with good precision.
Asakura, Toshihide; Kim, S.-Y.; Morita, Yasuji; Ozawa, Masaki*
Journal of Nuclear and Radiochemical Sciences, 6(3), p.267 - 269, 2005/12
An electrolytic extraction (EE) method, i.e. electro-reductive deposition, of Tc from nitric acid aqueous solution was studied for future reprocessing. After 30 min of constant potential electrolysis by carbon electrode at -0.3 V vs. SSE (Standard Silver Electrode), Tc concentration in 3 M nitric acid decreased to 93 % of the initial value, which corresponds to 7 % of deposition. With co-existence of Pd, the value reached to 15 % of deposition equivalent by electrolysis at 
0.0 V vs. SSE for 60 min. An acceleration effect of Pd on Tc deposition (promoter effect) was suggested. The concentration, however, increased to the initial value after further electrolysis and competing re-dissolution of deposited Tc was also suggested. In cyclic voltammetry measurements, it was found that the deposit from Tc-Pd-Ru-Rh solution dissolved easier than that from Pd-Ru-Rh did. In electrolyzed Tc solution, an absorption peak at 482 nm was found. It can be attributed to the complex with nitrite anion, and the complex formation is proposed as one possible mechanism of Tc re-dissolution.
CKurata, Yuji; Futakawa, Masatoshi; Saito, Shigeru
Journal of Nuclear Materials, 343(1-3), p.333 - 340, 2005/08
Times Cited Count：72 Percentile：96.95(Materials Science, Multidisciplinary)In order to study effects of temperature and alloying elements on corrosion behavior in liquid Pb-Bi which will be used for an accelerator driven system (ADS), corrosion tests of various steels were conducted under static liquid Pb-Bi condition. The tests were performed in oxygen-saturated liquid Pb-Bi at 450C and 550C for 3000h. Oxide films were formed during corrosion at 450C and 550C. Corrosion depth of steels decreased at 450C with increasing Cr content of steels. Austenitic stainless steels containing Ni didn't exhibit appreciable dissolution of Ni and Cr at 450C. The thick ferrite layer produced by dissolution of Ni and Cr was found in JPCA and type 316ss at 550C. For this reason the corrosion depth of austenitic stainless steels, JPCA and type 316ss became large. A Si-added austenitic stainless steel showed good corrosion resistance at 550C because a protective oxide film formed on the steel prevented dissolution of Ni and Cr into liquid Pb-Bi.
Kokusen, Junya; Seki, Masakazu; Abe, Masayuki; Nakazaki, Masato; Kida, Takashi; Umeda, Miki; Kihara, Takehiro; Sugikawa, Susumu
JAERI-Tech 2005-004, 53 Pages, 2005/03
JAERI-Tech-2005-004.pdf:5.92MB
This report presents operating records of dissolution of uranium dioxide and concentration of uranyl nitrate solution and acid removal, which have been performed from 1994 through 2003, for the purpose of feeding 10% and 6% enriched uranyl nitrate solution fuel to Static Experimental Critical Facility(STACY) and Transient Experimental Critical Facility(TRACY) in Nuclear Fuel Safety Engineering Facility(NUCEF).
Shirai, Osamu; Kato, Tetsuya*; Iwai, Takashi; Arai, Yasuo; Yamashita, Toshiyuki
Journal of Physics and Chemistry of Solids, 66(2-4), p.456 - 460, 2005/02
Times Cited Count：8 Percentile：37.11(Chemistry, Multidisciplinary)Electrochemical behaviors of PuN and (U, Pu)N in the LiCl-KCl eutectic melt containing UCl and PuCl at 773 K were investigated by cyclic voltammetry. The electrochemical dissolution of PuN and (U, Pu)N began nearly at -1.0 V vs. the Ag/AgCl reference electrode. The rest potentials of PuN and (U, Pu)N were observed at about 0.15 V more negative potential than that of UN since the equilibrium potential of UN is about 0.15 V more positive than that of PuN. In the cyclic voltammogram measured by using (U, Pu)N as the working electrode, a steep rise of the positive current was observed at more positive potential than -0.4 V in analogy with the cyclic voltammogram measured by using UN as the working electrode. In addition, there were two anodic current waves in the voltammogram with (U, Pu)N, though the wave form was not clear. This indicates that UN and PuN would be dissolved independently irrespective of formation of the solid solution, (U, Pu)N.
Mineo, Hideaki; Isogai, Hikaru; Morita, Yasuji; Uchiyama, Gunzo*
Journal of Nuclear Science and Technology, 41(2), p.126 - 134, 2004/02
Times Cited Count：7 Percentile：45.11(Nuclear Science & Technology)A simple equation was proposed for the dissolution rate of spent LWR fuel, of which the change in the dissolution area was estimated by taking into account of the area of the cracks occurring due to thermal shrinkage of the pellets during irradiation. The applicability of proposed equation was examined using LWR fuel dissolution test results in the present study as well as the results obtained by other workers. The equation showed good agreements with the dissolution test results obtained from spent fuel pellets and pulverized spent fuel. It was indicated that the proposed equation was simple and would be useful for the prediction of dissolution of spent LWR fuels. However, the initial effective dissolution area, the parameter of the equation, was found to depend on the temperature, which could not be explained by the proposed equation. Further studies on the role of other factors affecting dissolution rate, such as nitrous acid, in the dissolution of spent fuel was required.
Kurata, Yuji; Kikuchi, Kenji; Saito, Shigeru; Futakawa, Masatoshi; Sasa, Toshinobu
FZKA-6876, p.190 - 198, 2003/12
A report at MEGAPIE(Megawatt Pilot Experiment) Technical R & D Meeting is collected into an FZK report. According to the static corrosion tests, Al surface-treated layer produced by the gas diffusion method exhabited corrosion resistance to liquid Pb-Bi, while Al surface-treated layer produced by the melt dipping method suffered a severe corrosion attack. Furtheremore, it was found that a thick ferrite layer was formed in the surface of austenitic stainless steel at 550C. Dissolution at high temperature parts, precipitation of Fe-Cr alloy and deposition of PbO at low temperature parts occured in the first loop corrosion test. These caused plugging of the narrow passage in electro-magnetic pumu(EMP) system. Adoption of filters and a wide passage in an EMP system, and the use of an inner-polished tube specimen brought about a good effect.
Matsumoto, Shiro*; Uchiyama, Gunzo; Ozawa, Masaki*; Kobayashi, Y.*; Shirato, K.*
Radiochemistry, 45(3), p.219 - 224, 2003/05
no abstracts in English
Mineo, Hideaki; Goto, Minoru; Iizuka, Masaru*; Fujisaki, Susumu; Hagiya, Hiromichi*; Uchiyama, Gunzo
Separation Science and Technology, 38(9), p.1981 - 2001, 2003/05
Times Cited Count：22 Percentile：63.74(Chemistry, Multidisciplinary)no abstracts in English
